Winix Air purifier C535 It Doesn't Work in Auto Mode
What this problem usually means
Frequently Asked Questions entry: the unit doesn't work in Auto Mode, in which the fan speed is automatically adjusted according to indoor air quality as detected by the Smart Sensor (Odor Sensor).
Likely causes
- Auto Mode has not been selected
- The Odor Sensor is blocked or clogged
How to fix it — step by step
- Press the Mode button until Auto Mode is selected
- Check whether the sensor is blocked or clogged
- Wipe the Odor Sensor with a wet cloth, then dry it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.