Winix Air purifier AAPU500-JLE Smart Sensor (Dust Sensor) Cleaning

What this problem usually means

Sensor-cleaning guide from the manual's Cleaning Care section: clean the Smart Sensor (Dust Sensor) with a vacuum cleaner, at a cleaning interval of every 2 months.

Likely causes

  1. Dust builds up on the Smart Sensor (Dust Sensor)
  2. The sensor has not been cleaned at the recommended 2-month interval

How to fix it — step by step

  1. Unplug the power cord first and wait until the unit has cooled down before cleaning
  2. Clean the Smart Sensor (Dust Sensor) with a vacuum cleaner
  3. Repeat every 2 months for optimal performance

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Winix Air purifier AAPU500-JLE problems

See all Winix AAPU500-JLE codes & guides →