Winix Air purifier AAPU500-JLE Check Filter

What this problem usually means

Check Filter indicator: the LED light indicates when it is time to change the filter. When the Check Filter indicator LED is on, it is time to replace the 360 All-in-One True HEPA Filter, which is cleaned once every 14 days and lasts approximately 12 months.

Likely causes

  1. 360 All-in-One True HEPA Filter has reached the end of its approximately 12-month life
  2. Filter replacement interval reached - intervals may vary depending on the environment

How to fix it — step by step

  1. Turn the product upside down, grab the handle at the bottom, turn it counter-clockwise and pull out the filter cover
  2. Remove the old filter and install the new filter top side down into the bottom of the unit until fully inserted, then turn the handle clockwise to close the filter cover and return the product upright
  3. After replacing the 360 All-in-One True HEPA Filter, use a small object such as a paper clip to press and hold the Filter Reset Button for at least 5 seconds until the Check Filter light turns off → Shop the 360 all-in-one true hepa filter at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Winix Air purifier AAPU500-JLE problems

See all Winix AAPU500-JLE codes & guides →