Whirlpool Oven Current tech-sheet models (Whirlpool tech sheet W11503310) F3 E2 Error Code

What the F3 E2 code means

Warming drawer temperature sensor fault, in the current Whirlpool tech sheet W11503310.

Likely causes

  1. Oven overheating in Bake from a drifted sensor or welded relay (older platform)
  2. Warming drawer sensor open or shorted (current tech-sheet platform)
  3. Failed oven temperature sensor → Shop the oven temperature sensor at RepairClinic

How to fix it — step by step

  1. Press Cancel and let the oven cool completely; do not use self-clean
  2. Switch the breaker off for 1 minute and try a low Bake setting (skip this if your model lists F3 E2 as the warming drawer sensor and the oven itself is behaving)
  3. If the code returns, switch off at the breaker and schedule service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F3 E2 code

Before you buy: check the oven temperature sensor first

Test: Unplug the range and measure the oven temperature sensor's resistance at the sensor connector or the control check points in the tech sheet.

A good one reads: 1080 Ω at 21°C / 70°F, rising to 1654 Ω at 177°C / 350°F — add about 2 Ω per 1°F above room temperature (Whirlpool tech sheet 8303103 / W10201489A). If the resistance is not valid, replace the sensor.

Test values from forum.appliancepartspros.com documentation - confirm against your model's own tech sheet.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven Current tech-sheet models (Whirlpool tech sheet W11503310) error codes

See all Whirlpool Current tech-sheet models (Whirlpool tech sheet W11503310) codes & guides →