Whirlpool Oven Current models (Whirlpool Product Help) F9 E0 Error Code

What the F9 E0 code means

Miswired house or range (Whirlpool's current official meaning): the control detected a wrong electrical supply - incorrect wiring at the home supply or the range's hard-wire / cord connection, line noise after an outage, or keys pressed during the 10-second power-up delay. This differs from classic F9, which was a door lock code.

Likely causes

  1. Range miswired at installation (wrong L1 / L2 / neutral connections)
  2. Power outage or surge producing line noise at power-up
  3. Buttons pressed within 10 seconds of power being restored

How to fix it — step by step

  1. Switch the breaker off for 60 seconds, switch it back on, do not press any keys for 10 seconds, and watch for a minute
  2. If the code clears and does not return, reset the clock and use the oven normally
  3. If it returns - especially on a recently installed oven - stop and have a qualified electrician check the supply wiring; do not rewire it yourself

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F9 E0 code

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Whirlpool Oven Current models (Whirlpool Product Help) error codes

See all Whirlpool Current models (Whirlpool Product Help) codes & guides →