Whirlpool Dryer Cabrio Steam and 2015 Cabrio F6 E2 Error Code
What the F6 E2 code means
Communication failure: there is no communication between the electronic control board and the control console (shown as F6 E2 or F6 E3).
Likely causes
- Loose harness between the control board and console
- Damaged wire harness → Shop the wire harness at RepairClinic
- Failed control console
- Failed electronic control board → Shop the electronic control board at RepairClinic
How to fix it — step by step
- Unplug the dryer for 1 minute and restore power
- Retry a cycle; if the code returns, call for service to check the harness, console and control board → Shop the control console at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the electronic control board.
Shop the electronic control board at RepairClinic or Amazon
Also tied to this fault: control console - Shop at RepairClinic or Amazon; wire harness - Shop at RepairClinic or Amazon
Parts that commonly fix the F6 E2 code
- electronic control board - Shop at RepairClinic or Amazon
- control console - Shop at RepairClinic or Amazon
- wire harness - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.
Related Whirlpool Dryer Cabrio Steam and 2015 Cabrio error codes
See all Whirlpool Cabrio Steam and 2015 Cabrio codes & guides →