Volvo Wagon V60 Rear suspension sagging

What this problem usually means

V60s fitted with the optional Nivomat self-leveling rear suspension have an estate-specific failure: the Nivomat dampers either work fully or not at all. Failed units sag at the rear under load or ride rock-hard, and replacement is costly because the dampers must be replaced in pairs together with the springs; the P3 chassis cannot simply be converted to cheap standard dampers.

Likely causes

  1. Failed Nivomat self-leveling rear dampers

How to fix it — step by step

  1. Load the cargo area and check whether the rear sags and fails to level itself after a short drive
  2. Note a rock-hard rear ride as the other failure presentation
  3. Confirm the car is actually fitted with Nivomat suspension before ordering parts
  4. Budget for a matched pair of Nivomat dampers with springs rather than a single unit
  5. Have ride height verified after replacement

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Wagon V60 problems

See all Volvo V60 codes & guides →