Volvo Sedan S90 (Second generation, 2016–2024) Excessive oil consumption
What this problem usually means
The 2.0-litre Drive-E petrol engines in the T5 and T6 (and T8) can consume excessive oil on earlier production cars, with owners needing to top up between service intervals. Symptoms include a burning smell, faint blue exhaust smoke under load, and an oil level that drops noticeably between services.
Likely causes
- Piston ring design allowing oil into the combustion chamber
- Extra heat load from the T6 supercharger worsening consumption
How to fix it — step by step
- Check the oil level carefully — a recently serviced car that is already low is a warning sign
- Top up to the mark and monitor consumption between services
- Have a Volvo specialist confirm the consumption rate over a measured interval
- Updated piston rings are the rectification on confirmed cases — a labour-intensive engine job → Shop the piston rings at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the piston rings.
Parts that commonly fix it
- piston rings - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.
Related Volvo Sedan S90 (Second generation, 2016–2024) problems
- Infotainment screen freezes or reboots
- PowerPulse hose failure and turbo lag (D5 diesel)
- Vibration when braking from rear rotors
- Air suspension sagging or fault warning
- Coolant leak from hoses
See all Volvo S90 (Second generation, 2016–2024) codes & guides →