Volvo Sedan S90 (Second generation, 2016–2024) Coolant leak from hoses

What this problem usually means

SPA-platform S90s have a known vulnerability in their coolant plumbing: specific coolant pipes and bleed hoses develop leaks, and coolant caps have also been flagged. The first sign is often an 'Engine Too Hot' warning, with white residue or dried coolant visible around hose joints.

Likely causes

  1. Coolant pipe or bleed hose leaking
  2. Coolant reservoir cap failure
  3. Higher system pressures on T6 variants accelerating hose wear

How to fix it — step by step

  1. Check the coolant reservoir level and look for white residue or dried coolant around hose joints after the car has sat overnight → Shop the coolant reservoir cap at Amazon → Shop the coolant hose at Amazon
  2. Top up coolant to the mark and monitor how quickly the level falls
  3. Have the leaking hose, pipe or cap replaced — do not keep driving on a falling level
  4. If the 'Engine Too Hot' warning appears, stop and let the engine cool before driving on

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Sedan S90 (Second generation, 2016–2024) problems

See all Volvo S90 (Second generation, 2016–2024) codes & guides →