Vizio TV Won't Turn On
What this problem usually means
The TV shows no picture, will not turn on, or its power light does not remain lit. Vizio's official guide works this in order — power cord, outlet test, its documented power cycle, then the remote — because most no-power cases are a loose cord, a dead outlet/strip, or a temporary glitch rather than a dead TV, but a set that still will not start on a known-good outlet after a power cycle likely has an internal power supply or main board failure.
Likely causes
- Power cord loosened, especially after the TV was moved
- Dead wall outlet, power strip, surge protector, or extension cord
- Temporary software/power glitch needing a power cycle
- Remote failure masking a working TV (dead batteries, blocked sensor)
- Failed power supply board or main board → Shop the power supply board at RepairClinic
How to fix it — step by step
- Check the power cord is firmly connected to the back of the TV and to the wall outlet, surge protector, or power strip. → Shop the power cord at RepairClinic
- Test the outlet by plugging in another device such as a lamp or phone charger; if it does not work, try another outlet.
- Temporarily connect the TV directly to a working wall outlet, bypassing any power strip, surge protector, or extension cord.
- Power cycle exactly as Vizio documents: unplug the TV, wait at least 5 seconds, press and hold the physical Power button on the TV for 3-5 seconds (usually on the bottom left or right side), plug it back in, and press Power on the remote or TV — some Vizio TVs turn on automatically when power is restored.
- If the power light is on but the TV does not respond, press the Power button on the TV itself, replace the remote batteries, make sure nothing blocks the remote sensor, and check another nearby Vizio remote is not controlling it. → Shop the remote control at RepairClinic
- Disconnect all HDMI and USB devices and try again.
- If it still will not turn on, contact Vizio Support — internal board repair is not a user step.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the power supply board.
Shop the power supply board at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon; power cord - Shop at RepairClinic or Amazon; remote control - Shop at RepairClinic or Amazon
Parts that commonly fix it
- power supply board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
- power cord - Shop at RepairClinic or Amazon
- remote control - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.