Trane Furnace S-series seven-segment display — S9V2-VS E06 Error Code

What the E06 code means

On Trane S9V2-VS furnaces only, code E06 combines two electrical faults: line voltage polarity reversed or bad grounding. Other S-series models split these into E6.1 and E6.2.

Likely causes

  1. Reversed line and neutral at the furnace
  2. Missing or poor earth ground
  3. Recent electrical work

How to fix it — step by step

  1. Confirm the breaker and furnace switch are on
  2. Do not rewire the furnace supply yourself
  3. Call an electrician or HVAC technician to correct polarity and grounding

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E06 code

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Trane manual is on Trane's support site — you'll need your model number.

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Trane Furnace S-series seven-segment display — S9V2-VS error codes

See all Trane S-series seven-segment display — S9V2-VS codes & guides →