Trane Furnace S-series seven-segment display — S8V2/S9V2-VS E17 Error Code

What the E17 code means

On Trane S8V2 and S9V2-VS furnaces, code E17 means a blower communication error — the blower motor is not responding to the control (worded 'blower motor no communication response' on the S9V2-VS).

Likely causes

  1. Loose blower communication harness
  2. Failed variable-speed blower motor → Shop the blower motor at RepairClinic
  3. Failed control board communication circuit → Shop the control board at RepairClinic
  4. Power interruption to the motor

How to fix it — step by step

  1. Turn furnace power off for 60 seconds and back on once — a power glitch can drop communication
  2. Confirm the breaker is on and the blower door is seated
  3. If E17 returns, call a technician to test the motor and harness

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E17 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Trane manual is on Trane's support site — you'll need your model number.

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Trane Furnace S-series seven-segment display — S8V2/S9V2-VS error codes

See all Trane S-series seven-segment display — S8V2/S9V2-VS codes & guides →