Toyota Truck Tacoma Transmission not shifting correctly at high mileage
What this problem usually means
High-mileage Tacomas built from 1995 to 2015, typically at 125,000 to 150,000 miles, can stop shifting correctly. The identified causes are an incorrectly adjusted throttle position sensor or a faulty shift solenoid, and fixing those returned most transmissions to normal without a complete overhaul.
Likely causes
- incorrectly adjusted throttle position sensor
- faulty shift solenoid
How to fix it — step by step
- Note which shifts are wrong and whether the problem is worse hot or cold
- Have the transmission fluid level and condition checked
- Have a shop test and adjust the throttle position sensor and test the shift solenoids → Shop the throttle position sensor at Amazon → Shop the shift solenoid at Amazon
- Replace a failed solenoid and road-test before considering any transmission rebuild
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the shift solenoid.
Shop the shift solenoid at Amazon
Also tied to this fault: throttle position sensor - Shop at Amazon
Parts that commonly fix it
- shift solenoid - Shop at Amazon
- throttle position sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.