Tesla Sedan Model S (2012–2020) Yellow border on touchscreen

What this problem usually means

A yellow or brownish band creeping in from the edges of the 17-inch touchscreen is a cosmetic defect of the pre-2021 Model S display: the adhesive layer bonding the screen degrades with heat and UV exposure. The touchscreen underneath keeps working normally; the yellowing does not mean the computer behind it is failing.

Likely causes

  1. Heat and UV degradation of the display's adhesive layer
  2. Age-related delamination of the screen (bubbles or sticky gel in more advanced cases)

How to fix it — step by step

  1. Ask Tesla service about their UV light treatment, which cures the adhesive and can remove the yellowing in a few hours without replacing the screen; not every service center has the tool
  2. Check warranty or goodwill coverage before paying, as Tesla has covered many of these screens
  3. If the screen also has bubbles or delamination, UV treatment will not save it and display replacement is the fix
  4. Park in shade or use a windshield sunshade to slow further degradation

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Tesla manual is on Tesla's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Tesla Sedan Model S (2012–2020) problems

See all Tesla Model S (2012–2020) codes & guides →