TCL TV Roku TV Two Short Blinks, Pause, Repeat (Network Connection Lost)

What it should look like on your machine

then it repeats

2 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

The TCL Roku TV user guide's status-indicator table documents a specific pattern: two short blinks, a pause, then repeat means the TV was connected and paired with a Roku account and now has no network connection. It is a lost-network signal from the Roku platform, not a hardware blink fault code.

Likely causes

  1. Router/modem offline or internet outage
  2. Wi-Fi signal lost or too weak
  3. Network password changed or saved connection reset needed

How to fix it — step by step

  1. Check another device on the same Wi-Fi to confirm the network itself is up
  2. Restart the TV via Settings > System > Power > System restart
  3. Run Settings > Network > Check connection, then re-run Set up connection > Wireless and re-enter the password carefully
  4. If it previously connected, do a Network connection reset in Settings > System > Advanced system settings, then reconnect

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related TCL TV Roku TV problems

See all TCL Roku TV codes & guides →