TCL TV Roku TV Standby Light Blinking
What this problem usually means
TCL's official Roku TV status-light guide says the front status light turns on and off or blinks in different ways depending on TV status: a slow pulsing blink means the TV is starting up, receiving an update from USB, or powering down to standby; the light dims on and off once when a remote command is received; solid on means off/standby and ready to use; and off means the screen is active or the TV has no power. TCL states a blinking light can also, in some cases, report an error, and advises restart steps if it blinks repeatedly and the TV is not responding normally - TCL does not publish a blink-count fault table for these TVs.
Likely causes
- Normal startup, USB update or power-down in progress
- Remote commands being received
- A stalled startup or software state if blinking repeats and the TV does not respond
How to fix it — step by step
- Wait for a slow pulse to finish - startup, update and power-down are supposed to blink
- Restart via Settings > System > Power > System restart, or unplug the TV for 30 seconds and plug it back in
- If you only want the standby light off, go to Settings > System > Power > Standby LED and select Off (not all models have this setting)
- If blinking continues with no response after a restart, record the model and light behaviour and contact TCL Support
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the power supply board.
Shop the power supply board at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- power supply board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.