Sony TV EX2L chassis (KLV-40/46/52V530A, KLV-40/46/52V550A) 8 Blinks

What it should look like on your machine

then it repeats

8 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

The red standby LED blinks eight times, pauses, and repeats. On EX2L-chassis models (KLV-V530A/V550A series) Sony's service manual Standby LED Error Display lists 8 blinks as AUDIO, with the power board named in the countermeasure — an audio-section fault, NOT the software/network meaning Sony attaches to 8 blinks on certain later (GN1T/Android-era) models. Always confirm against your exact model's service documentation.

Likely causes

  1. Audio amplifier fault
  2. Shorted speaker or external speaker/soundbar wiring triggering audio protection
  3. Power supply board fault in the audio supply section

How to fix it — step by step

  1. Disconnect external speakers, soundbars and all HDMI devices, then perform a power reset: unplug the TV for 2 minutes and plug it back in
  2. Inspect speaker connections and wiring for shorts
  3. If the 8-blink pattern returns with nothing connected, the power board / main board audio section requires service — do not follow the software-update procedure for this chassis, it addresses a different fault → Shop the main board at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Sony TV EX2L chassis (KLV-40/46/52V530A, KLV-40/46/52V550A) problems

See all Sony EX2L chassis (KLV-40/46/52V530A, KLV-40/46/52V550A) codes & guides →