Shark Air purifier HC500 Series Tip-Over Automatic Shutoff
What this problem usually means
Safety shutoff: if the unit tips over, it automatically turns off.
Likely causes
- Unit has been knocked or tipped over
How to fix it — step by step
- Turn the power off and unplug the unit.
- Set the unit upright on a level floor.
- Plug the unit in and turn the power on.
- To restart heating, turn the mode dial to the Heat icon and press the power/heat button.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.