Samsung Washer LC Error Code
What the LC code means
Low water level detected / water leakage error: moisture is detected somewhere it does not belong, or water is leaving the tub. When LC displays, the washer drains for about 3 minutes.
Likely causes
- Actual leak from a hose, door seal, filter cap or tub connection
- Drain hose end lower than the base of the washer, letting water siphon out
- Excess suds from too much or non-HE detergent fooling the level sensor
- Faulty water level sensor or its hose clogged / folded
- Loose water level sensor connections
How to fix it — step by step
- Look for water under and behind the washer and check hose, door seal and filter-cap connections
- Make sure the end of the drain hose is not lower than the base of the washer and is not on the floor
- Run an empty cycle with no detergent and check whether suds appear; repeat empty cycles until suds are gone
- Unplug for 2-3 minutes, restore power and restart the cycle
Parts that commonly fix the LC code
- water level sensor - Shop at RepairClinic
- inlet hose - Shop at RepairClinic
- drain hose - Shop at RepairClinic
- door seal - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.