Samsung TV Lines on Screen

What this problem usually means

Vertical or horizontal lines, flickering or missing pixels appear on the picture. Samsung's Picture Test is the deciding check: lines that appear in the test image are in the TV itself (panel or internal boards), while a clean test image means the fault is the source device, its HDMI cable or a software glitch.

Likely causes

  1. Software glitch or outdated firmware
  2. HDMI cable or external device signal interference
  3. Loose internal ribbon / T-Con board fault → Shop the t-con board at RepairClinic
  4. Damaged panel or faulty internal components
  5. Overheating or power supply problems

How to fix it — step by step

  1. Power cycle the TV: unplug for 60 seconds, then plug back in
  2. Run Picture Test: Home > Settings > Support > Device Care > Self Diagnosis > Picture Test and follow the prompts
  3. If the test image is clean, inspect and reseat HDMI cables, replace damaged ones and test with another source device → Shop the hdmi cable at RepairClinic
  4. Check for software updates: Settings > Support > Software Update > Update Now
  5. If lines appear in the Picture Test itself, the panel or internal boards need service - contact Samsung with model code, software version and serial number ready

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Samsung TV problems

See all Samsung TV codes & guides →