Samsung Jet Bot AI+ Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 13 problems covered.
Shop Samsung Jet Bot AI+ parts at Amazon
- Can't move in this no-go zone. Please move me somewhere else. — Voice guide: location recognition shows the Jet Bot is placed within a No-go Zone.
- Can't see anything. Please clean the front with a soft cloth. — Voice guide: foreign matter has accumulated on the Obstacle Sensor Window.
- It's difficult to move. Please move me somewhere else. — Voice guide: the Jet Bot is caught, stuck or trapped while moving around. The Status Indicator turns red and blinks with the voice guide.
- Please check the left wheel to see if there's something stuck in it. — Voice guide: foreign matter is caught in the left Driving Wheel.
- Please check the right wheel to see if there's something stuck in it. — Voice guide: foreign matter is caught in the right Driving Wheel.
- Please insert the bin so cleaning can start. — Voice guide: the Dustbin is not inserted.
- Please remove the brush and take out whatever's stuck in there. — Voice guide: foreign matter is caught in the brush.
- Something's stuck in the side brush. Please remove it. — Voice guide: foreign matter is caught in the side brush.
- Something's wrong with the cliff sensor. Please clean the 4 small black windows underneath with a soft cloth. — Voice guide: foreign matter has accumulated on the Cliff Sensor.
- Something's wrong with the front bump sensors. Please open the cover and check. The bumper might be jammed, or there might be something stuck in there. — Voice guide: the bumper sensor needs to be checked.
- Something's wrong with the LiDAR bump sensor. The LiDAR cap might be jammed, or there might be something stuck in there. — Voice guide: the LiDAR bump sensor needs to be checked.
- Something's wrong with the main system. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Voice guide: there is a problem with the main system.
- The LiDAR sensor needs to be reset. Turn the power off, then on again. If that doesn't fix it, contact Customer Service. — Voice guide: there is a problem with the LiDAR sensor.