Samsung Dishwasher LC Error Code

What the LC code means

Leakage error: the leak sensor detects moisture in the base, so the dishwasher turns itself on and keeps trying to drain. Newer models show LC and older models show LE; on WaterWall models it can also mean a blocked water reflector.

Likely causes

  1. A genuine leak from a hose, pump or door seal
  2. Too much detergent or wrong detergent causing over-sudsing and overflow
  3. Water in the base pan from a prior overflow
  4. Blocked WaterWall reflector on WaterWall models

How to fix it — step by step

  1. Turn off the water supply and power at the breaker
  2. Check under and around the dishwasher and at the door seal for water
  3. Remove debris from the door gasket and check only dishwasher detergent was used
  4. Do not keep running it; if no simple overflow cause is found, request service to find the leak

Parts that commonly fix the LC code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung dishwasher error codes

See all Samsung dishwasher codes & guides →