Samsung Dishwasher 1E Error Code

What the 1E code means

On WaterWall models this is a clogged filter error: water is not passing through the filter. On rotary spray-arm models 1E/IE means the same high-temperature heater error as HC, where the water inside is too hot.

Likely causes

  1. Clogged fine filter on WaterWall models
  2. Overheating inside the tub on rotary models
  3. Heater or temperature sensing fault on rotary models

How to fix it — step by step

  1. Remove and clean the fine filter at the bottom of the dishwasher per the manual
  2. On rotary models, switch power off at the breaker for 30 seconds, empty the dishwasher, add detergent and run a Normal cycle
  3. If the code returns after cleaning or the test cycle, request service

Parts that commonly fix the 1E code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung dishwasher error codes

See all Samsung dishwasher codes & guides →