Roborock Robot vacuum S7, S7+, S7 MaxV Error 27
What this problem usually means
VibraRise system jammed. Check for obstructions. S7-series models with the VibraRise mopping system only (verified in the official S7 and S7 MaxV manuals, whose error tables are identical). The vibrating mop module cannot move as it should.
Likely causes
- Object jammed in or under the VibraRise mop mount
- Mop cloth or mount not fitted correctly
- Debris around the vibration module
How to fix it — step by step
- Stop the robot and remove the VibraRise mop cloth mount
- Check for and remove any jammed objects around the module and mount
- Refit the mop cloth flat and the mount until it clicks in place
- Restart cleaning / mopping
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.