Roborock Robot vacuum S6 MaxV, Q5, Q7 Max, S7, S7 MaxV Error 22

What this problem usually means

Dock locator error - clean and retry (S6 MaxV manual: 'dock locator dirty'; Q5/Q7 Max and S7/S7 MaxV manuals: 'dock locator error'). The dock locator signal is blocked by dirt, so the robot is having trouble locating / reading the dock. Do not confuse this with Error 22 on S4 Max / S5 Max / S6 / S6 Pure models, where the same number means 'wipe the recharge sensor' (see the other Error 22 entry). The E3 manual states Error 22 is not applicable to the E series.

Likely causes

  1. Dock locator / dock location beacon blocked by dust or dirt
  2. Dock moved or beacon obstructed
  3. Bright light or obstacles interfering with the dock signal

How to fix it — step by step

  1. Wipe the dock locator on the robot clean
  2. Clean the dock location beacon / signal area on the dock and make sure nothing blocks it
  3. Make sure the dock is flat against a wall with clear space in front of it
  4. Place the robot in front of the dock and retry

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Roborock Robot vacuum S6 MaxV, Q5, Q7 Max, S7, S7 MaxV problems

See all Roborock S6 MaxV, Q5, Q7 Max, S7, S7 MaxV codes & guides →