Roborock Robot vacuum S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV, Q5, Q7 Max, S7, S7 MaxV Error 16
What this problem usually means
Robot tilted. The robot is not level, for example after riding up onto something or being placed on a slope. Listed in the S-series, Q-series and S7-series manuals. The E3 manual states explicitly that Error 16 is a code for other models and is not applicable to the E series, and the E5 table likewise does not list it.
Likely causes
- Robot rode up onto a threshold, cable or object
- Robot placed on uneven or sloping ground
- A wheel lifted so the body is at an angle
How to fix it — step by step
- Pick the robot up and clear whatever it rode onto
- Place it on level, flat ground
- Check both wheels are down and moving freely
- Restart cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Roborock Robot vacuum S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV, Q5, Q7 Max, S7, S7 MaxV problems
See all Roborock S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV, Q5, Q7 Max, S7, S7 MaxV codes & guides →