Rheem Furnace 0 Error Code

What the 0 code means

Standby on Rheem furnaces with the 7-segment diagnostic display (including R95P models). This is a normal status, not a fault — the furnace is powered and waiting for a thermostat call.

Likely causes

  1. no call for heat from the thermostat
  2. thermostat set to Off or satisfied

How to fix it — step by step

  1. Check the thermostat is set to Heat and above room temperature
  2. Check thermostat batteries if fitted
  3. Check the furnace power switch and breaker are on
  4. If there is a heat call and the display still shows 0, call a technician

Parts that commonly fix the 0 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace error codes

See all Rheem furnace codes & guides →