RAM Truck 2500 (DJ, 2014–2026) Engine ticking noise

What this problem usually means

On 2014-2022 Ram 2500s with the 6.4L HEMI, a steady tick from the valvetrain that does not fade when warm can be a roller lifter that has stopped rolling and is grinding its camshaft lobe, bringing misfires and a rough idle. CarWhere notes the Petro v. FCA lawsuit alleges exactly this wear on 2014-2022 trucks; there is no recall.

Likely causes

  1. Failed MDS roller lifter wearing the camshaft lobe
  2. Collapsed lifter no longer opening its valve fully
  3. Metal debris from lifter/cam wear circulating in the oil
  4. Broken exhaust manifold bolt mimicking a lifter tick (see the cold-start guide)

How to fix it — step by step

  1. Listen at cold start and again at warm idle; a lifter tick stays or gets louder warm, while a manifold tick fades
  2. Scan for misfire codes on one cylinder and note any rough idle or power loss
  3. Check oil level, condition and service history; look for metal glitter in drained oil
  4. Have a shop confirm lifter/cam wear before authorizing parts, and ask what records exist of any earlier cam or lifter work
  5. If lifter failure is confirmed, expect camshaft and lifters together; continuing to drive spreads metal through the engine → Shop the camshaft at Amazon → Shop the lifters at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related RAM Truck 2500 (DJ, 2014–2026) problems

See all RAM 2500 (DJ, 2014–2026) codes & guides →