Porsche SUV Macan Suspension clunking noise over bumps
What this problem usually means
At 100,000-150,000 miles, the Macan's suspension bushings are expected to be worn, leading to clunking noises and a harsher ride. The bushings are wear items rather than a design defect, but the clunks are a reliable sign they are due.
Likely causes
- Worn suspension bushings
- Worn control arm bushings at high mileage
How to fix it — step by step
- Note whether the clunk comes from the front or rear and over what kind of bumps
- Have the car lifted and the control arm and suspension bushings inspected for cracking and play → Shop the control arm bushings at Amazon
- Check the struts and mounts while the suspension is being assessed
- Replace worn bushings or control arms as required → Shop the control arms at Amazon
- Have a wheel alignment done after suspension work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the control arm bushings.
Shop the control arm bushings at Amazon
Also tied to this fault: control arms - Shop at Amazon
Parts that commonly fix it
- control arm bushings - Shop at Amazon
- control arms - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.