Porsche SUV Macan Engine knocking noise
What this problem usually means
On the 2017-2018 Macan S and GTS 3.0L twin-turbo V6, sharp metallic knocking sounds that increase with engine speed often indicate failed connecting rod bearings or other catastrophic internal damage. A sudden loss of power, rough running and a flashing check engine light can also come from loss of compression, including scored cylinder walls, which was documented on a 2017 GTS engine with zero compression in one cylinder.
Likely causes
- Failed connecting rod bearings → Shop the connecting rod bearings at Amazon
- Scored cylinder walls causing loss of compression
- Oil starvation damage
How to fix it — step by step
- Stop driving immediately if you hear sharp metallic knocking; continuing can destroy the engine completely
- Check the oil level and look for metal shavings in the oil or filter
- Have compression tested on all cylinders to find a dead or low cylinder
- Have a Porsche specialist assess whether the damage is bearings, cylinder scoring or a wrist pin before authorising an engine replacement
- Internal engine repair or replacement is the documented outcome for confirmed cases
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the connecting rod bearings.
Parts that commonly fix it
- connecting rod bearings - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.