Polaris Pool cleaner FREEDOM Error 25

What this problem usually means

iAquaLink app error 25 on the FREEDOM cordless cleaner: charging error caused by dirty charge plates, so the cleaner cannot charge properly on its station.

Likely causes

  1. Dirty or filmed-over charge plates on the underside of the cleaner and on the charging station base

How to fix it — step by step

  1. Clean the charge plates — located on the underside of the cleaner and on the charging station base — with a cloth and fresh water (non-salt water)
  2. Dry the cleaner before putting it back on the charging station

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Polaris Pool cleaner FREEDOM problems

See all Polaris FREEDOM codes & guides →