Philips Air purifier AC2958 Filter cleaning alert
What this problem usually means
The filter cleaning alert displays on the screen: the surface of the NanoProtect Series 3 filter (FY2180/30) needs vacuum cleaning.
Likely causes
- Filter surface loaded with dust
- Filter cleaning time has elapsed
How to fix it — step by step
- Remove the back cover and pull the filter out of the appliance.
- Vacuum-clean the surface of the filter.
- Put the filter back into the appliance and reattach the back cover.
- Switch the appliance on.
- Touch and hold the filter status check/reset button for 3 seconds to reset the filter cleaning time.
- Wash your hands after handling the filter.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the NanoProtect Series 3 filter (FY2180/30).
Parts that commonly fix it
- NanoProtect Series 3 filter (FY2180/30) - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.