Philips Air purifier AC2887 F0 Error Code

What the F0 code means

F0 displays on the screen: the pre-filter needs cleaning.

Likely causes

  1. Pre-filter cleaning time has elapsed
  2. Pre-filter surface loaded with dust

How to fix it — step by step

  1. Pull the bottom part of the front panel to remove it from the appliance.
  2. Press the two clips down and pull the pre-filter towards you. → Shop the pre-filter at Amazon
  3. Wash the pre-filter under a running tap. If it is very dirty, use a soft brush to brush away the dust.
  4. Air dry the pre-filter completely before refitting it - a wet pre-filter can breed bacteria and shorten its life.
  5. Put the pre-filter back into the appliance, with the side with the two clips pointing towards you and all hooks properly attached.
  6. Reattach the front panel: mount it onto the top of the appliance first, then gently push it against the body.
  7. Touch and hold the reset button for 3 seconds to reset the pre-filter cleaning time.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F0 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Philips Air purifier AC2887 error codes

See all Philips AC2887 codes & guides →