Philips Air purifier AC2887 A3 Error Code

What the A3 code means

A3 displays on the screen: replace the NanoProtect Pro S2 filter (FY2428). This is the healthy air protect lock - the filter code displays when the filter is almost expired, and if the filter is not replaced within 14 days the appliance stops operating and locks.

Likely causes

  1. NanoProtect Pro S2 filter lifetime expired
  2. Filter not replaced within 14 days of the code appearing (appliance locked)

How to fix it — step by step

  1. Switch off the appliance before replacing the filter.
  2. Take out the expired filter according to the code displayed and dispose of it. Do not touch the pleated filter surface or smell the filter, as it has collected pollutants from the air.
  3. Remove all packaging from the new filter (NanoProtect Pro S2 filter FY2428). → Shop the nanoprotect pro s2 filter (fy2428) at Amazon
  4. Place the new filter into the appliance.
  5. Touch and hold the reset button for 3 seconds to reset the filter lifetime counter.
  6. Wash your hands after changing the filter.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the A3 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Philips Air purifier AC2887 error codes

See all Philips AC2887 codes & guides →