Philips Air purifier AC2887/AC2882 A3 Error Code
What the A3 code means
A3 displays on the screen: replace the NanoProtect filter HEPA Series 3 (FY2422). Under the healthy air protect lock, if the filter is not replaced within 14 days of the code appearing, the appliance stops operating and locks.
Likely causes
- NanoProtect filter HEPA Series 3 lifetime expired
How to fix it — step by step
- Switch off the appliance before replacing the filter.
- Take out the expired filter according to the code displayed and dispose of it. Do not touch the pleated filter surface or smell the filter, as it has collected pollutants from the air.
- Remove all packaging from the new filter (NanoProtect filter HEPA Series 3 FY2422). → Shop the nanoprotect filter hepa series 3 (fy2422) at Amazon
- Place the new filter into the appliance.
- Touch and hold the reset button for 3 seconds to reset the filter lifetime counter.
- Wash your hands after changing the filter.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the NanoProtect filter HEPA Series 3 (FY2422).
Shop the NanoProtect filter HEPA Series 3 (FY2422) at Amazon
Parts that commonly fix the A3 code
- NanoProtect filter HEPA Series 3 (FY2422) - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.