Philips Air purifier AC2887/AC2882 A3 and C7 (alternating)

What this problem usually means

A3 and C7 display alternately on the screen: replace both filters - the NanoProtect filter HEPA Series 3 (FY2422) and the NanoProtect filter AC (FY2420).

Likely causes

  1. Both filter lifetimes expired

How to fix it — step by step

  1. Switch off the appliance before replacing the filters.
  2. Take out both expired filters and dispose of them. Do not touch the pleated filter surfaces or smell the filters, as they have collected pollutants from the air.
  3. Remove all packaging from the new filters.
  4. Place the new NanoProtect filter HEPA Series 3 (FY2422) and NanoProtect filter AC (FY2420) into the appliance. → Shop the nanoprotect filter hepa series 3 (fy2422) at Amazon → Shop the nanoprotect filter ac (fy2420) at Amazon
  5. Touch and hold the reset button for 3 seconds to reset the filter lifetime counter.
  6. Wash your hands after changing the filters.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Philips Air purifier AC2887/AC2882 problems

See all Philips AC2887/AC2882 codes & guides →