Pentair Pool pump IntelliFlo3 VSF Over Voltage
What this problem usually means
On Pentair IntelliFlo3 VSF variable-speed pool pumps, Over Voltage is an alarm for supplied voltage outside the proper range; the guide says when voltage returns to normal the alert will clear and the pump will resume operation.
Likely causes
- supply voltage too high
- utility voltage surge
- wiring/supply fault
How to fix it — step by step
- Leave the pump off and let the alarm clear on its own when voltage normalizes, as the guide describes
- Check if other equipment is showing power problems
- Do not rewire the pump circuit yourself
- If Over Voltage recurs, call a licensed electrician or pool/spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the drive.
Parts that commonly fix it
- drive - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.