Pentair Pool pump IntelliFlo3 VSF Over Current
What this problem usually means
On Pentair IntelliFlo3 VSF variable-speed pool pumps, Over Current means load has increased on the motor, which the guide attributes to debris, part interference, temperature issues, age of parts, or supplied voltage.
Likely causes
- debris in the pump or impeller → Shop the impeller at RepairClinic
- part interference in the rotating assembly
- worn/aging parts
- supplied voltage problem
How to fix it — step by step
- Turn power off at the breaker
- Empty the strainer basket and look for visible debris
- Restore power and try one restart
- Do not disassemble the pump rotating assembly yourself unless you can reseal it
- If Over Current returns, call a pool/spa technician to inspect the rotating parts
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the impeller.
Shop the impeller at RepairClinic or Amazon
Also tied to this fault: motor drive - Shop at RepairClinic or Amazon
Parts that commonly fix it
- impeller - Shop at RepairClinic or Amazon
- motor drive - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.