Nissan Sedan Sentra Tire pressure light stays on
What this problem usually means
Several 2008 Sentra drivers report the tire pressure monitor light switching on at start-up and staying illuminated even though checked tire pressures are normal, with a similar problem in some 2014 units. The source also reports defective 2008 hubcaps peeling and rims corroding faster than expected, weakening the wheels.
Likely causes
- faulty tire pressure monitoring
- peeling hubcaps
- corroding rims
How to fix it — step by step
- Check all tire pressures with a gauge and inflate to the placard value if low
- Note whether the light stays on after pressures are confirmed correct
- Inspect hubcaps and rims for peeling finish or corrosion → Shop the hubcaps at Amazon → Shop the rims at Amazon
- Have a shop test the tire pressure monitoring system if the light will not clear
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the hubcaps.
Also tied to this fault: rims - Shop at Amazon
Parts that commonly fix it
- hubcaps - Shop at Amazon
- rims - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.