Nissan Sedan Altima Oil leak from engine seals
What this problem usually means
Altima models with the 3.5-liter V6 engine often leak oil from the oil cooler o-ring, where the oil filter attaches to the cooler. If the leak continues, oil pressure drops and the engine can start making strange noises, and careless filter removal can ruin the cooler seal.
Likely causes
- failed oil cooler o-ring
- damaged oil cooler seal during oil filter replacement
How to fix it — step by step
- Check the oil level and stop driving if the oil pressure warning appears
- Look for oil around the oil filter and cooler area
- Have the o-ring inspected and replaced if it is leaking → Shop the o-ring at Amazon
- Replace the entire oil cooler if the seal surface is damaged, and handle the filter carefully at the next oil change → Shop the oil cooler at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the o-ring.
Also tied to this fault: oil cooler - Shop at Amazon
Parts that commonly fix it
- o-ring - Shop at Amazon
- oil cooler - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.