Nissan Sedan Altima Catalytic converter failure

What this problem usually means

The Altima's catalytic converter can stop working properly, illuminating the check engine light, on model years from 1999 to 2015 per the source. A faulty converter should be replaced promptly because its catalyst materials can be sucked into the engine and damage internal parts.

Likely causes

  1. failed catalytic converter

How to fix it — step by step

  1. Note the check engine light and any loss of power or rattling from the exhaust
  2. Have a shop confirm the converter has failed before replacing parts
  3. Replace the faulty catalytic converter as soon as possible → Shop the catalytic converter at Amazon
  4. Recheck for engine damage if the converter broke apart

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Nissan Sedan Altima problems

See all Nissan Altima codes & guides →