Mitsubishi SUV Outlander CVT shudders, slips or fails
What this problem usually means
Third-generation Outlanders (2014-2016 especially) suffer premature failure of the Jatco CVT: hesitation, shaking and shuddering, slipping, stalling and a flashing transmission light, sometimes before 100,000 miles. Engine Patrol's Outlander guide calls transmission failure the model's most common problem and notes failed CVTs are replaced rather than repaired.
Likely causes
- Worn CVT belt/pulleys
- Degraded CVT fluid from overheating
- Internal CVT wear
How to fix it — step by step
- Note shudder, slip or flare on acceleration and whether the transmission light flashes
- Have the CVT fluid condition checked - dark, burnt fluid supports internal wear → Shop the cvt fluid at Amazon
- Confirm any CVT control software recall/update has been applied
- A failed CVT is replaced as a unit - get a specialist quote; fluid changes every ~30,000 miles protect a healthy one
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the cvt transmission.
Shop the cvt transmission at Amazon
Also tied to this fault: cvt fluid - Shop at Amazon
Parts that commonly fix it
- cvt transmission - Shop at Amazon
- cvt fluid - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.