Mercedes-Benz SUV GLE Oil leak from oil filter housing
What this problem usually means
The 3.0-litre M256 turbocharged inline-six in the GLE 450 is prone to leaks from the oil filter housing and adapter assembly, which integrates an oil cooler with shared coolant passages. An internal cooler leak can allow coolant to migrate into the engine oil - a serious failure risk if caught late. Check the oil for milky residue indicating coolant contamination.
Likely causes
- Oil filter housing/adapter seal failure
- Internal oil cooler leak mixing coolant into oil
How to fix it — step by step
- Check the oil level and look for milky residue on the filler cap/dipstick (coolant contamination)
- Inspect the filter housing area for external oil/coolant leaks → Shop the oil filter housing at Amazon
- Do not keep driving if coolant is in the oil
- Replace the housing seals/assembly as confirmed - a specialist job
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the oil filter housing.
Shop the oil filter housing at Amazon
Also tied to this fault: oil cooler seal - Shop at Amazon
Parts that commonly fix it
- oil filter housing - Shop at Amazon
- oil cooler seal - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.