Mercedes-Benz SUV GLE Oil leak from camshaft adjuster magnet
What this problem usually means
The GLE 400's M276 V6 is listed for camshaft adjusters among its most-seen faults: the adjuster magnets' seals harden and oil seeps into the electrical connectors, and on this engine family oil from the front of the engine can travel through the wiring harness. The same engine's oil filter housing and oil cooler seals also harden and leak.
Likely causes
- Camshaft adjuster magnet seal hardened with heat → Shop the camshaft adjuster magnet at Amazon
- Oil wicking into the wiring harness
How to fix it — step by step
- Inspect camshaft magnet/sensor connectors at the front of the engine for oil
- Scan for camshaft position codes
- Replace the leaking magnet(s) and clean the connectors
- Check the harness toward the ECU for oil travel
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the camshaft adjuster magnet.
Parts that commonly fix it
- camshaft adjuster magnet - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.