Mercedes-Benz SUV GLE (W166, 2015–2018) Transmission Shudder At Low Speed

What this problem usually means

The GLE 250d's 9G-Tronic automatic (type 725.0) develops a low-speed shudder from wear in the torque converter lockup clutch, felt as a vibration under gentle acceleration as the clutch engages. It is worth separating from the earlier ML's 7G-Tronic conductor plate problem, which belongs to the previous gearbox and does not apply here. Fresh fluid is the first step; a shudder that persists on fresh fluid with correct adaptations is the converter clutch itself.

Likely causes

  1. Torque converter lockup clutch wear
  2. Aged transmission fluid worsening lockup behaviour
  3. Drifted shift and lockup adaptations
  4. Engine mounts or driveline wear mimicking a transmission shudder

How to fix it — step by step

  1. Note the exact speeds and throttle loads where the shudder occurs and reproduce them on a test drive
  2. Check the transmission fluid service history → Shop the transmission fluid at Amazon
  3. Have the fluid serviced and the lockup adaptations reset, then re-test at the same speeds
  4. If the shudder persists, have the torque converter assessed by a Mercedes transmission specialist → Shop the torque converter at Amazon
  5. Confirm smooth lockup under gentle acceleration after the repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz SUV GLE (W166, 2015–2018) problems

See all Mercedes-Benz GLE (W166, 2015–2018) codes & guides →