Mercedes-Benz SUV GLE (W166, 2015–2018) Timing Chain Stretch - Diesel

What this problem usually means

The GLE 250d (W166, from the August 2015 facelift that renamed the ML) uses the OM651 2.1L diesel, whose timing chain runs at the rear of the engine and stretches typically between 100,000 and 180,000 km, announced by a cold-start rattle that lasts several seconds. Unlike many rear-chain engines, the OM651's chain can be renewed in place at moderate cost; only extensive consequential work requires the engine and gearbox to come out. The rattle should not be ignored, because the chain drives the valve train on an interference engine.

Likely causes

  1. Rear timing chain stretched with mileage
  2. Tensioner at the limit of its travel
  3. Guide wear adding slack and noise
  4. Long oil intervals accelerating chain wear on a diesel

How to fix it — step by step

  1. Listen at a cold start for a rattle lasting several seconds, the documented OM651 pattern
  2. Have timing and camshaft correlation codes read to confirm chain stretch → Shop the timing chain at Amazon
  3. Ask a Mercedes diesel specialist whether the chain can be renewed in place on your engine
  4. Do not keep driving on an established rattle; a jumped chain destroys the engine
  5. Have the chain, tensioner and guides replaced as a set; this is internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz SUV GLE (W166, 2015–2018) problems

See all Mercedes-Benz GLE (W166, 2015–2018) codes & guides →