Mercedes-Benz Sedan C-Class Coolant leak from plastic cooling parts

What this problem usually means

Mercedes cooling systems use plastic pipes, expansion tanks and thermostat housings that turn brittle after years of heat cycles; the M264 in later C 300s is specifically listed for coolant leaks. A sweet coolant smell, a low-coolant message or a temperature gauge that climbs in traffic are the early signs, and the system should be pressure-tested to find the leak before parts are replaced.

Likely causes

  1. Brittle plastic coolant pipes, expansion tank or thermostat housing → Shop the coolant expansion tank at Amazon
  2. Electronically controlled thermostat or electric water pump failure → Shop the water pump at Amazon

How to fix it — step by step

  1. Check the coolant level cold and note any sweet smell or low-coolant message
  2. Do not drive on a climbing temperature gauge
  3. Have the system pressure-tested to locate the leak
  4. Replace the failed pipe, tank, thermostat housing or pump with the specified part and coolant → Shop the thermostat housing at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz Sedan C-Class problems

See all Mercedes-Benz C-Class codes & guides →