Mazda SUV CX-9 (1st gen, 2007–2015) Engine Misfire

What this problem usually means

Failed ignition coils on the 2007-2015 CX-9 can cause the engine to misfire, and if not repaired in time can even damage the PCM, per the Samarins guide. Keeping spark plugs replaced within the recommended intervals reduces the chances of ignition coil failures, because worn plugs raise the voltage the coils must produce.

Likely causes

  1. Failed ignition coil on one or more cylinders → Shop the ignition coil at Amazon
  2. Worn spark plugs overloading the coils
  3. Coil connector or wiring fault on the affected cylinder
  4. Continued misfiring damaging the catalytic converter or PCM if driven on

How to fix it — step by step

  1. Have the misfire codes read and note which cylinder is flagged before buying parts
  2. Swap the suspect coil with one from a good cylinder and see whether the misfire code moves with it; that confirms the coil
  3. Replace spark plugs at the recommended interval, and immediately if they are worn, to protect the new coil → Shop the spark plugs at Amazon
  4. Do not keep driving with a flashing check engine light; that signals a damaging misfire

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mazda SUV CX-9 (1st gen, 2007–2015) problems

See all Mazda CX-9 (1st gen, 2007–2015) codes & guides →