Mazda SUV CX-9 (1st gen, 2007–2015) Check Engine Light On

What this problem usually means

On the 2007-2015 CX-9 a check engine light with code P0451 is often caused by a clogged fuel tank pressure sensor, and the Samarins guide notes the problem often happens after the vehicle has been rustproofed. The sensor is not an expensive part and is easy to replace.

Likely causes

  1. Clogged fuel tank pressure sensor setting code P0451
  2. Rustproofing material contaminating or blocking the sensor
  3. EVAP system hose or connection fault producing the same code
  4. Loose or damaged fuel cap, which should be ruled out first on any EVAP code

How to fix it — step by step

  1. Have the exact code read and write it down; P0451 on this model points first to the fuel tank pressure sensor → Shop the fuel tank pressure sensor at Amazon
  2. Tighten the fuel cap until it clicks and clear the code once to rule out the free cause → Shop the fuel cap at Amazon
  3. Inspect the sensor for clogging or rustproofing contamination before replacing EVAP components at random
  4. Replace the fuel tank pressure sensor if it is clogged or its readings are implausible

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mazda SUV CX-9 (1st gen, 2007–2015) problems

See all Mazda CX-9 (1st gen, 2007–2015) codes & guides →