Mazda Convertible MX-5 Miata Transmission grinding noise
What this problem usually means
Early fourth-generation (ND) MX-5 Miatas had several cases of early manual transmission failure, typically on 2016 to 2017 soft-top cars within the first 10,000 to 20,000 miles. Symptoms include grinding noises when shifting, notchy shifts, an inability to shift into 2nd or 3rd gear and metal bits in the transmission fluid; a Mazda TSB says the problem affects cars built before September 2016, after which updated transmission components were fitted.
Likely causes
- early manual transmission internal failure on cars built before september 2016
- worn synchronizers and gear damage → Shop the synchronizer at Amazon
How to fix it — step by step
- Shift through every gear on a test drive and note grinding or notchiness, especially into 2nd and 3rd
- Check the build date and any transmission replacement history against the Mazda TSB
- Have the transmission fluid inspected for metal debris if grinding is present → Shop the transmission fluid at Amazon
- Have a shop repair or replace the manual transmission with the updated components
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the transmission fluid.
Shop the transmission fluid at Amazon
Also tied to this fault: synchronizer - Shop at Amazon
Parts that commonly fix it
- transmission fluid - Shop at Amazon
- synchronizer - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.